Aller au contenu
View in the app

A better way to browse. Learn more.

CIVILMANIA

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Exprimer un besoin

fundamentals of earthquake engineering

Archive
Question posée le 24 février 2008 par Invités, 1 réponse
Posté(e)
comment_623

posté par bentafat_rachid

Fundamentals of

Earthquake

Engineering

1202035829_123.JPG

1.1 Introduction

This chapter provides a basic understanding of earthquakes, by first discussing the causes of earthquakes,

then defining commonly used terms, explaining how earthquakes are measured, discussing the distribution

of seismicity, and, finally, explaining how seismicity can be characterized.

Earthquakes are broad-banded vibratory ground motions, resulting from a number of causes

including tectonic ground motions, volcanism, landslides, rockbursts, and man-made explosions. Of

these, naturally occurring tectonic-related earthquakes are the largest and most important. These are

caused by the fracture and sliding of rock along faults within the Earth’s crust. A fault is a zone of the

earth’s crust within which the two sides have moved — faults may be hundreds of miles long, from one

to over one hundred miles deep, and are sometimes not readily apparent on the ground surface.

Earthquakes initiate a number of phenomena or agents, termed seismic hazards, which can cause significant

damage to the built environment — these include fault rupture, vibratory ground motion

(i.e., shaking), inundation (e.g., tsunami, seiche, dam failure), various kinds of permanent ground failure

(e.g., liquefaction), fire, or hazardous materials release. In a particular earthquake event, any particular

hazard can dominate, and historically each has caused major damage and great loss of life in particular

earthquakes.

For most earthquakes, shaking is the dominant and most widespread agent of damage. Shaking near

the actual earthquake rupture lasts only during the time when the fault ruptures, a process that takes

Charles Scawthorn

Department of Urban Management,

Kyoto University,

Kyoto, Japan

1.1 Introduction ................................................... 1-1

1.2 Causes of Earthquakes and Faulting ..................... 1-2

1.3 Measurement of Earthquakes 1-5

Magnitude Intensity Time History Elastic Response

Spectra Inelastic Response Spectra

1.4 Distribution of Seismicity .................................. 1-20

1.5 Strong Motion Attenuation and Duration ............. 1-21

1.6 Characterization of Seismicity ............................. 1-26

Glossary................................................................. 1-28

References .............................................................. 1-30

Further

http://www.zshare.net/download/714694273a4569/

  • Réponses 1
  • Vues 823
  • Créé
  • Dernière réponse

Jours populaires

recommended_posts

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.